Photo Eye Infrared GC550014-bat 18 P2 (relay 2) is pre-wired

P2 (relay 2) is pre-wired to the Open/Free Exit on J1 connector

While the green LD light is on

The timer is supplied with a 3 wire harness that easily wires to the control board

Access Code The 2 to 5-digit code used to open the gate (24 unique codes are possible)

from momentary mode (default) to latching mode

Photo Eye Infrared GC550014-bat 18 P2 (relay 2) is pre-wiredThe photo eye is a secondary safety device. It produces a beam between the 2 units. When the beam is broken it will keep the gate from closing. It requires wires to be connected to both units (20 gauge) for operation. Typically a swing gate needs two sets of photo eyes for the best area protection. One set of photo eyes pointing across the drive on the outside of the hinge post (A). The second set mounted across the drive at the point where the gate